[Translate to Englisch (Nordamerika):]
EC1_GB_black
VOC

Servoplan S 111

Premium fast setting self-leveling compound

  • Self-leveling, fast drying, self-curing
  • No primer required over non-absorbent substrates
  • From 1/32“ – 1 1/2“ (1 – 40 mm) layer thickness
  • Extremely fast setting
  • Excellent flow characteristics
  • Pumpable
  • Excellent final grip
  • For interior and exterior installations**
  • Suitable as a final finish on interior installations
  • Suitable under tiles, parquet, hardwood and resilient flooring
  • Install resilient flooring in 4 hours*

Cement based leveling compound with high acrylic polymer content and excellent self-leveling properties for preparing ready-to-install substrates up to 1/32“ - 11/2“ (1 - 40 mm) thickness for the immediate installation of floor coverings. Suitable for install-in-one-day applications. In a minimum thickness of 3/16“ (5 mm) suitable as final load top in garages, basements, storage facilities and alike.
Suitable under ceramic and natural stone tiles in combination with waterproofing membrane in accordance to 0, A0 and B0 classification. Servoplan S 111 is suitable on poured asphalt of hardness class IC 10 (not as a final topping) and electric floor heating systems. To extend support of the tensile and flexural strengths use Kiesel fibers as an additive.

 

 

 

The substrate must comply with VOB Part C, DIN 18 352 or DIN 18 365 and must be installation ready. Prepare substrates according to the current BEB publication „Assessment and preparation of substrates“ and TKB-8. Depending on the type of substrate and the intended use prime first with Okatmos® UG 30, Okatmos® EG 20, Okatmos® DSG, Okamul PU-V rapid or Okapox GF.
Kiesel system structure must be executed. Traffic ready and non-absorbent substrates such as ceramic tiles, terrazzo, and mastic asphalt must be clean and free of dust do not require primer. Clean stone floors with Okamul GR cleaner before any application. Prime calcium sulphate screeds in layers thicker than 10 mm with Okatmos® DSG, or Okapox GF. Prime slabs-on-grade with Okapox GF with two layers crisscrossing each layer adding quartz sand over second layer.

Follow additional installation and floor preparation guidelines located in the latest TTMAC and TCNA installation manuals.

Mix Servoplan S 111 with clean water. Using an electric mixer at max 600 U / min mix to a lump free consistency. Mix again after about 5 minutes slake time. Spread self-leveling compound with proper a trowel or spreader. As a wearing surface minimum thickness of 5 mm to comply.
When using as a final toping you may expect discoloration in cement caused by the nature of the cementitious material. Wet-on-wet applications are possible, otherwise when completely dry re-prime with Okatmos® UG 30 or Okatmos® DSG. Avoid direct sunlight and drafts during drying/pouring. If in doubt perform mock-up installation. When adding Kiesel reinforcing fibers mix self-leveling first and then add the fibers with ratio of 1 bag of fibers per 1 bag of Servoplan S 111. Let is slake and spread the self-leveling compound using proper tools.

 

Color

Grey 

VOC

0,0 g/L

Antimicrobial technology

Yes

Application

Interior and exterior **,floors

Thickness

1/32“ - 1 ½“ (1 - 40 mm) with tension free curing 3/16“ (5 mm) minimum

Suitable for chair castors (DIN EN 12529)

Min 1/32“ (1 mm) thickness (DIN EN 12 529)

Application temperature

41 °F to 77 °F (+5 °C to +25 °C) (surface)

Water demand

Approx. 1.5 U.S. gals./55 lbs powder, approx. 5.5 l/25 kg powder

Processing time*

Approx. 25 minutes approx. 10 - 15 minutes with accelerator

Readiness for covering

Approx. 1 - 2 hours, depending on the thickness approx. 30 - 40 minutes with accelerator

Loadable*

Coveringafter approx. 
ceramic tiles 1 - 2 hours
textile-, PVC-/CV-, rubber- and linoleum4 hours
natural Stone, cork, engineered wood12 hours
paints and other coatings with Okapox Accelerator
24 hours
ceramic tiles depending on the layer thickness1 hour
textile-, PVC-/CV-, rubber- and linoleum1 - 1.5
hours
natural Stone, cork, engineered wood6 hours
paints and other coatings

12 hours
Floor heating system

Suitable

GISCODE

ZP 1 - low in chrome according to TRGS 613

EMICODE®

EC 1 (GEV)

Storage

Store in a dry place for up to 6 months

* 

At 68 °F (+20 °C) and 65 % relative humidity. Higher temperature and low humidity decreases, lower temperature and high humidity increases this value respectively.

** 

Only in combination with following waterproofing membrane: Servoflex DMS 1K Plus SuperTec.

Approx. 1.6 kg/m² per mm thickness, 52 ft² per 1/8” thickness

Clean tools and machinery immediately after use.

Clean tools immediately with water.

DescriptionItem No. 
42 x 25 kg/ 55 lbs paper bags42015

The aforementioned information, especially the proposals for processing and utilizing our product, is based on our knowledge and experience. We recommend that you carry out your own tests in every case to ensure the suitability of our products for the intended process and processing purposes because of the different materials and the working conditions which lie beyond our area of influence. No liability can be derived from this advice or from verbal advice, unless we are responsible for (criminal) intent or gross negligence in this respect.

Coverage calculator imperial
Coverage calculator metric
Calculate quickly and easily

Back