Okamul WH Plus
Epoxy cleaning agent
- Facilitates emulsification and cleaning process
- Reduces epoxy film during washing process
- Re-emulsifies epoxy film up to 24 hours
- Can be diluted with water
- Sprayable
Washing aid for easier emulsifying and cleaning process. Reduces film resin and removes light epoxy film within 24 hours.
As the washing aid in epoxy grouting:
Add Okamul WH Plus at maximum 10% to the wash water and start immediately washing with Okapox royal grouted coverings using proper scrubbing pad and viscose sponge. Alternatively spray Okamul WH Plus on the grouted areas, re-emulsify and clean with clean water. Protect all adjacent surfaces. Make frequent water changes. Rinse again with clean water and clean sponge.
Follow additional installation and floor preparation guidelines located in the latest TTMAC and TCNA installation manuals.
To remove epoxy film:
Use undiluted or in a mixing ratio of max. 1:1 with water at least 12 hours after grouting. Protect all adjoining surfaces. After a reaction time of max. 15 minutes use white scrubbing pad in circular motion agitating epoxy film. Then clean or rinse with plenty of water.
For cleaning tools such as spatulas, trowels, mixing paddles:
Apply undiluted Okamul WH Plus with a brush on existing residues of PU adhesives, Okamul PU-K epoxy primer and Okapox GF. Remove residue with cloth or paper towels first and then rinse it with water.
Check tiles, stone covering and tools for suitability first.
As the adhesive and paint remover:
Apply with a brush undiluted Okamul WH Plus in thick layer to remove ink / adhesive layer. Protect all adjacent areas. After reaction time of 15 minutes remove designated layers with spatula. Clean or rinse then with plenty of water. Try it first in an inconspicuous place for suitability before using it on designated area.
Color
White/ milky
0,0 g/L
Yes
Application
Interior/exterior, walls and floors
Density
1,004 kg/dm³
Application temperature
+10 °C to +30 °C / 12° F to 86 °F
> 91 °C / 195.8 °F
S 1 according to TRGS 610
24 months in a cool place
Avoid direct skin contact and use proper rubber gloves and goggle protection. Ensure good ventilation.
Avoid contact with plastics or natural stones (limestone).
As epoxy film remover: approx. 50 - 100 g/m²
Wash additive: approx. 30 - 60 g/m²
Brush, white scrubbing pad, viscose sponge
Clean tools immediately with water.
| Description | Item No. | |
|---|---|---|
| 4 x 1 l/ 0.26 U.S. gals. plastic bottles | 50012 | |
| 5 l/ 1.32 U.S. gals. plastic canister | 50011 |
The aforementioned information, especially the proposals for processing and utilizing our product, is based on our knowledge and experience. We recommend that you carry out your own tests in every case to ensure the suitability of our products for the intended process and processing purposes because of the different materials and the working conditions which lie beyond our area of influence. No liability can be derived from this advice or from verbal advice, unless we are responsible for (criminal) intent or gross negligence in this respect.